urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 702

The list can be modified using the
"This Device" represents Switchboard 1, i.e. the Switchboard application whose configuration page
has been opened via the configurator.
The CallMe app associated with the first Switchboard application in the list (box in red) is the one that will
ring after a call to all switchboards. If you want another CallMe app to ring, you need to reorder the list and
put the Switchboard application connected to the CallMe app you want to ring in the first place.
In the event that not all Switchboard applications of the "Block 1" node are connected to the
CallMe app, the CallMe app that rings is the one relating to the first Switchboard application found
in the list and connected to the app.
In general, any other Switchboard applications present on the other nodes of the same level (floor,
stair and block) will also appear in the list. These (if connected to a CallMe app) are to be taken into
consideration as the call is directed to all switchboards in the system.
702
Figure 768: Configuration page with several Switchboard applications on the plant
and buttons.
MT124-032M