urmet domus IPerCom 3.0.0 System Technical Manual For The Installer page 125

6.16.1.6.2 Transfer of the site ownership to another installer
The installer who created the project and its configuration is the only one able to make changes to the
system: for security reasons, any other installer who connects to the site with a different Urmet Cloud
account can make changes to the project but will not be able to apply them to the plant site. When you
press the "Apply changes" button from IPerCom Installer Tools, the following dialog box appears:
Figure 123: distribution of the configuration forbidden to another installer
However, it could happen that another installer needs to make changes to the system configuration. To do
this, the installer who created the site can transfer it to another installer via the "Hand over site to another
installer" button in the Site Authorization Management section ---> Installer Authorization:
Figure 124: transfer to another installer
The transfer methods are the same as those seen for transferring the site from an installer to a building
manager, that is an invitation is sent via email from the old installer to the new installer. When the new
installer accepts the invitation by pressing the relevant link, he will be the only one able to make changes to
the system.
The "Hand over site to another installer" button has two operating modes depending on whether the site
has already been transferred to a building manager or not.
MT124-032M 125