Rep 3.1 Paper Feeder; Rep 3.2 Turn Roll Assembly - Xerox N2125N - DocuPrint B/W Laser Printer Service Manual

REP 3.1 Paper Feeder

Parts List on PL 3.1
Removal
WARNING
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
NOTE: Remove all Optional 550 Sheet Feeders.
2. Remove the Left Interface Cover Assembly
3. Remove the Left Cover (REP 1.2).
4. Remove the Front Cover Assembly (REP
5. Remove the Left Front Cover (REP 1.7).
6. Remove the Left Plate Assembly (REP
7. Remove the Plate Handle (REP 1.12).
8. Open Rear Door.
9. Remove the Top Cover Assembly (REP
10. Remove the Right Cover (REP 1.5).
11. Remove the LVPS PWB (REP 9.5).
12. Remove the seven screws that secure the Paper Feeder to the printer
13. Pull the Paper Feeder toward the front to remove
Figure 1 Paper Feeder
Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2125
(REP 1.1).
1.6).
1.11).
1.4).
(Figure 1).
(Figure 1).

REP 3.2 Turn Roll Assembly

Parts List on PL 3.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Remove the Left Interface Cover Assembly
3. Remove the Left Cover
4. Remove the Front Cover Assembly
5. Remove the Left Front Cover
6. Remove the Left Plate Assembly
7. Remove the Plate Handle
8. Open Rear Door.
9. Remove the Top Cover Assembly
10. Remove the Right Cover
11. Remove the LVPS PWB
12. Remove the Paper Feeder
13. Disconnect P/J64 on the Feeder PWB
14. Remove the four screws that secure the Turn Roll Assembly to the Paper Feeder Assem-
bly (Figure 1).
15. Remove the Turn Roll Assembly together with the Extension Spring and Chute Spring
(Figure 1).
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-19
manuals4you.com manuals4you.com
WARNING
(REP 1.1).
(REP 1.2)
(REP 1.6).
(REP 1.7).
(REP 1.11).
(REP 1.12).
(REP 1.4).
(REP 1.5).
(REP 9.5).
(REP 3.1).
(Figure 1). Release cable from all cable clamps.
Figure 1 Turn Clutch Assembly
REP 3.1, REP 3.2
Repair-Adjustment