Printhead Assembly, Right And Left Printhead Restraints - Xerox Phaser 8400 Service Manual

Printhead Assembly, Right and Left Printhead
Restraints
(PL 2.4) (PL 2.5 and 2.6)
)Videos are available with instructions for replacing the Printhead
Assembly. Videos are located on the Phaser 8400 Customer Support
training CD-ROM.
Warning
The printhead is hot when the printer is operating. Turn off power to the
printer and allow the printhead to cool for 30 minutes before starting
removal procedure.
Caution
Perform the steps in this procedure in the order given to prevent damage to
the printer
1.
Remove the inkloader assembly and door (see page 8-8).
Caution
Place several sheets of paper between the printhead and the drum to protect
the drum from damage.
8-12 Phaser 8400 Printer Service Manual