Control Accessories; Wall / Stand Mounted Support For Csnet Manager Lt/Xt; Pcc-1A; Prc-(10/15/20/30)E1 - Hitachi PC-ARF Technical Catalogue

3 Features and benefits

Control accessories

3.6 Control accessories

3.6.1 Wall / Stand mounted support for CSNET Manager LT/XT

CSNET Manager has standard VESA mounting dimensions commonly available in the market. However, HITACHI offers 2
accessories for the CSNET Manager (LT/XT) assembly:

Wall mounted support

Stand mounted support

3.6.2 PCC-1A

The PCC-1A is a 3P connector cable used when the remote ON/OFF device is connected or signals are taken out on the
printed circuit board. One set contains five 3P connector cables.
• Dedicated connector for the optional functions. To be connected to the printed circuit board of the units.
• This last updated PCC-1A connector cable does not contain any Substance of Very High Concern (SVHC) according to
Article 59 of REACH Regulation 1997/2006 of European Union.

3.6.3 PRC-(10/15/20/30)E1

The PRC-(10/15/20/30)E1 is a 2P extension cable intended for individual remote controllers or central extensions whose
cables need to be extended up to more than 30 m. When the total cable length is not higher than 30 m, other type cable
(more than 0.3 mm ) can be used.
2
• The 2P extension cable is available in four different lengths:
- PRC-10E1: 10 m
- PRC-15E1: 15 m
- PRC-20E1: 20 m
- PRC-30E1: 30 m
• The remote control cable can be extended to a maximum of 500 m.
53 53
TCGB0106 rev.0 - 12/2014
(Image to be informed later)
PCC-1A Optional function 3P connector cable
PRC-(10/15/20/30)E1: 2P extension cable
3