Hitachi PC-ARF Technical Catalogue page 216

4 Individual remote controls
Receiver kit for wireless remote control
d. Removing corner pocket cover method
Remove the corner pocket covers.
The corner pocket covers can be removed pulling
A
part toward the arrow direction.
8 After the installation work for receiver kit is completed, attach the corner pocket covers (3 portions). The detail should
be referred to the installation manual of the air panel.
N O T E
After the receiver kit is attached to the air panel, the one corner pocket cover (It was attached with air panel.) becomes unnecessary.
200
TCGB0106 rev.0 - 12/2014
A