Hitachi PC-ARF Technical Catalogue page 683

7 Gateways for building management systems
KNX001

Files
KNX001 saves the configuration of each project in the following files:
<TYPE>.INI A text file that saves information regarding the connection and other special adjustments.
<TYPE>.DAT
A text file with values separated by tabs, with information corresponding to the signals.
<TYPE>.HGT A binary file created from the files mentioned above. It is the one really sent to KNX001.
These files, once installation is completed, must be backed-up for future modifications. It is not permitted to obtain
the KNX001 configuration, only Upload is permitted, not Download.
In the file <TYPE>.INI the following adjustment variables are found:
[<TYPE>]
TmConnectCSNET_s=10, Timeout for connection with CSNET WEB (seconds)
TmResponseCSNET_s=2, Timeout for CSNET WEB response (seconds)
[EIB]
tS_ChekEIB=60, Rate of EIB electronic supervision (seconds)
tMS_WaitUpdate=2000, Timeout for Read request responses (milisec)
tMS_WaitInConect=6000, Timeout in Connect status (milisec)
N O T E
Do not touch these variables if you are not sure how they work. Their maladjustment may cause KNX001 not to operate or to operate
incorrectly.
667 667
TCGB0106 rev.0 - 12/2014
7