Hitachi PC-ARF Technical Catalogue page 105

4 Individual remote controls
PC-ARF

Procedure for setting the temperature, fan speed and louver direction.
Setting the temperature
1 Press " " or " " and select "TEMP".
2 By pressing " ", the temperature is increased by 1oC. (Max.
30oC). By pressing " ", the temperature is decreased by 1
ºC. (Cooling, Dry, Air Flow operation: Min. 19oC) (Heating
operation: Min. 17 ºC).
N O T E
The max/min temperature is available to change by setting the cool-
ing lower limit for setting temperature (or heating upper limit for setting
temperature) from the function selection.
Setting the fan speed
1 Press " " or " " and select "SPEED".
2 By pressing " " or " ", the fan speed will be changed as
follows.
N O T E
• During the dry operation, the fan speed is automatically changed
to "LOW" and cannot be changed to other fan speed. ("LOW" will
NOT be displayed on LCD (liquid crystal display) at this time. The
present setting condition will be displayed on LCD).
• The fan speed settings "HIGH H" and (or) "AUTO" may not be avail-
able depending on the indoor unit type.
89
TCGB0106 rev.0 - 12/2014
Meeting Room
A/C
MODE SPEED
COOL
HIGH
OK
SPEED
Meeting Room
A/C
MODE SPEED
COOL
HIGH
OK
SPEED ADJ
Meeting Room
A/C
MODE SPEED
COOL
HIGH
OK
MODE
A/C Meeting Room
MODE SPEED
COOL
LOW
OK
MODE
TEMP
ADJ
TEMP
4
TEMP
TEMP ADJ
TEMP
TEMP ADJ