Hitachi PC-ARF Technical Catalogue page 115

4 Individual remote controls
PC-ARF
6 Select "Yes" by pressing " " or " " and press "OK". The set-
ting is confirmed and the screen returns to the normal mode.
7 Ensure that "INDV" is turned on at the air flow section on the
normal mode.
Cancellation of louver setting
1 Select "Louver Setting" from the menu and press "OK".
2 Select "Cancel INDV Louver SET" from the individual louver
set and press "OK".
N O T E
If the number of indoor units connected with the remote control is 1, the
screen passes directly to display the step 4 after this step.
3 Select the indoor unit to cancel by pressing " ", " ", " " or
" ". Press "OK". The confirmation screen will be displayed.
N O T E
The indoor unit displayed on the screen flashes if the individual louver is
set.
4 Select "Yes" by pressing " " or " " and press "OK". The indi-
vidual louver setting is cancelled and the screen returns to the
normal mode.
N O T E
All the individual louver setting is cancelled.
99
TCGB0106 rev.0 - 12/2014
Louver Setting:01-03
Set individual louver?
Yes No
SEL. ENT. RTN.
OK
Meeting Room
A/C
MODE SPEED LOUV. TEMP
COOL
HIGH
INDV
SPEED ADJ
Menu 15:10(Fri)
Louver Setting
Louver Open/Close
02
VENTI
/
Total Heat Exchanger SET 03
Motion Sensor Setting
SEL. OK ENT. RTN.
Louver Setting
Louver Setting
Cancel INDV Louver SET
SEL. ENT. RTN.
OK
Cancel INDV Louver SET
01-01
01-02
01-03
01-04
Select unit to cancel.
SEL. ENT. RTN.
OK
Cancel INDV Louver SET:01-03
Cancel individual louver?
Yes No
SEL. ENT. RTN.
OK
4