Hitachi PC-ARF Technical Catalogue page 301

5 Centralised remote controls
PSC-A64GT
Information
Restore setting can be set by the screen of "Start-up" displayed.
1 Tap "Restore Setting" for more than 5 seconds in the lower right on the screen of "Start-up".
2 After a while, connection check process is started.
3 When the process for connection check is finished, "Adjusting Date/Time" screen is indicated. (Refer to Adjusting
Date/Time)

Checking Connection
1 Select "Checking Connection" on the screen of "Service Menu".
N O T E
This function cannot be selected when the air conditioner(s) is operated or the external input signal is input to the external input terminal
1 or 2.
2 Tap "OK" at the confirmation screen.
N O T E
If tap "Cancel", the screen will be returned to "Service Menu". Proceed to update the connection information depending on the setting
afterwards.
• Update connection information with keeping Group register and settings such as schedule setting, etc. (3)
• Perform reconnection checking by initializing each setting. (It is same as the restore setting). (7)
Service Menu
Optional Function
Group Register
Setting
Exception Demand Function
External Input Setting
Checking
Restore Setting
Connection
Alarm History
285
TCGB0106 rev.0 - 12/2014
Start-up
Restore Setting
Press and hold "Restore" button for at least 5 seconds.
(1)
25/01/2010 (Mon) 10:20
Exception Setting
External
of Run/Stop
Input/Output Setting
Operation
Contact Info.
Button Setting
Register
Back
Restore
Restore Setting
Confirmation
Start checking connection?
OK Cancel
(2)
5