Hitachi PC-ARF Technical Catalogue page 442

6 Building air conditioning controls
CSNET WEB (PSC-A160WEB1)
Connecting to CSNET WEB to configure the software
This option lets you change the PC network settings temporarily and connect to the CSNET WEB interface.
C A U T I O N
We recommend that you do not configure the software without configuring the CSNET WEB interface first.
1 Select Connect to CSNET WEB for Configuration, press Next and the Select Network Card window appears, show-
ing the network adaptors available in your PC.
2 Select the network adaptor you are going to use and press Next.
We recommend you choose Local area connection if the system does not already have a specific network (the net-
work administrator will help you make the correct choice).
3 Introduce the IP of the CSNET WEB you want to connect to. The configuration you have already chosen appears by
default. You should always introduce the temporary IP the PC has to use.
C A U T I O N
If the PC and CSNET WEB interface are connected to a local area network, the network configuration should be supplied by the network
administrator. Otherwise, use a valid configuration within the range set for the CSNET WEB interface. In case of doubt, consult the network
administrator.
4 Press Next to validate the changes, change the PC network configuration temporarily and start the CSNET WEB ap-
plication which configures the system.
5 When the application starts it configures the system as indicated in chapter
packaged units.
6 After completing the configuration close the CSNET WEB application and choose OK in the message Waiting for
CSNET WEB software to finish.... The installation will return to its initial screen.
426 426
TCGB0106 rev.0 - 12/2014
< Back Cancel
Next >
OK
Local area connection
Operation and configuration of
< Back Next > Cancel