Hitachi PC-ARF Technical Catalogue page 142

4 Individual remote controls
PC-ART
5 Press the SELECT DAY/SCHEDULE ▲ ▼ button to adjust the "minutes" and, once set,
press OK. The "minutes" will remain fixed and the switch-off "hour" will flash.
6 Set the switch-off time by following the same procedure as the switch-on time. The
schedule will be stored in the memory and all the available schedule will reappear (1, 2,
3, 4, S).
N O T E
Repeat from step 2 onwards to adjust the other schedule settings.
7 By pressing the TIMER button, SET and SCHEDULE are turned off and the system
switches to operation mode.
• Assigning timer schedules to the days of the week.
1 Press the TIMER button for more than 3 seconds and SET will appear. All the days of the
week will be displayed along with the schedule numbers (as explained in the previous
point).
2 Press the DAY ▼ button until the desired day appears. When pressed, the days of the week
will flash: [Mon]  [Tue]
several days flash, the same setting will apply to all of these days.
3 Press the SCHEDULE ▲ button until the desired schedule number flashes.
4 Press OK; the schedule number selected in step 3 applies to the days set in step 2. Press-
ing OK will either activate or deactivate the schedule. If it is activated, the word SCHED-
ULE will be displayed above the switch-off time.
5 Press the TIMER button; the system will exit the programming mode (SET will switch off)
and return to operation mode.
• Cancelling the timer
In operation mode, press and hold DAY/SCHEDULE ▲ ▼ simultaneously for at least 3 sec-
onds. NEXT SCHEDULE will flash. (The entire timer setting is cancelled)
In timer cancellation mode, press and hold DAY/SCHEDULE ▲ ▼ simultaneously for at least
3 seconds. NEXT SCHEDULE will appear. (Timer activation)
• Setting the temperature change (energy-saving mode).
1 Follow the switch-on/switch-off setting procedure in steps 1 and 2 of the
schedules" section and select program "S".
2 Follow the switch-on/switch-off setting procedure in steps 4, 5 and 6 in the
timer schedules" section and set the switch-on/switch-off time. This will bring up the set-
ting temperature.
126
TCGB0106 rev.0 - 12/2014
 ...  [Sun]  [Mon~Sun]  [Mon~Fri]  [Sat, Sun]  [Mon]... If
"Setting the timer
"Setting the
SET 1
: SCHEDULE
ON
:

OFF
1
SET
SCHEDULE
:
ON :

OFF
S
Mon
NEXT SCHEDULE
:
:
OFF
Sun
SET Mon Tue Wed Thu Fri Sat 1234S
:
ON :

OFF
Sun
SET Mon Tue Wed Thu Fri Sat 1234S
:
ON :

OFF
Sat Sun 1234S
SET Mon Tue Wed Thu Fri
: SCHEDULE
ON :

OFF
Mon
: NEXT SCHEDULE
:
OFF
1234S
Mon
: NEXT SCHEDULE
:
ON
1234S
Mon
: NEXT SCHEDULE
:
ON
1234S
SET
: SCHEDULE
ON
:

OFF
1234S
SET
: SCHEDULE
ON
:

OFF