Hitachi PC-ARF Technical Catalogue page 296

Table of Contents

Advertisement

5 Centralised remote controls
PSC-A64GT

Exception External Input
The external input signals such as "All Run/Stop", etc. are not accepted when this function has been set for the group.
The external input signal exception is available for the input terminal 1 and 2.
N O T E
If this function is set, the emergency stop command from the external input will be disabled.
1 Select "Exception External Input" on the screen of "Service Menu".
N O T E
This function cannot be selected when the air conditioner(s) is operated or the external input signal is input to the external input terminal
1 or 2.
2 Select "Selecting Groups of Exception External Input 1" or "Selecting Groups of Exception External Input 2" according
to the exception external input command.
(1)
Service Menu
Optional Function
Group Register
Setting
Exception
Demand Function
External Input
Setting
Checking
Restore Setting
Connection
Alarm History
3 Select Blocks/Groups for exception operation.
Tap each group or block button for the exception operation target, the marked of " " is indicated in the selected group
button.
If tap the same group or block button again, the selection of the group will be cancelled.
4 Tap "Done" to return to the screen of "Exception External Input".
Proceed to select the group depending on the setting afterwards.
Select exception group of other external input (1 or 2). (2)
Exit "Exception External Input". (5)
5 Tap "Back" to finish this setting. The screen is returned to "Service Menu".
(3)
Exception External Input 1
F-Level
F-Level
1-A
1-B
Group1A-01
Group1A-02
Group1B-01
Group1B-02
Group1A-03
Group1A-04
Group1B-03
Group1B-04
Group1A-05
Group1A-06
Group1B-05
Group1B-06
Group1A-07
Group1A-08
Group1B-07
Group1B-08
Group1A-09
Group1A-10
Group1B-09
Group1B-10
Group1A-11
Group1A-12
Group1B-11
Group1B-12
Group1A-13
Group1A-14
Group1B-13
Group1A-15
Group1A-16
280
TCGB0106 rev.0 - 12/2014
25/01/2010 (Mon) 10:20
Exception Setting
External
of Run/Stop
Input/Output Setting
Operation
Contact Info.
Button Setting
Register
Back
25/01/2010 (Mon) 10:20
F-Level
Annex
2
Buffet 1
Buffet 1
Group2-01
Group2-02
North Area
South Area
Buffet 1
Buffet 1
Group2-03
Group2-04
East Area
West Area
Buffet 2
Buffet 2
Group2-05
Group2-06
North Area
South Area
Buffet 2
Buffet 2
Group2-07
Group2-08
East Area
West Area
Meeting
Meeting
Group2-09
Group2-10
Room A
Room B
Meeting
Meeting
Group2-11
Room C
Room D
Meeting
Kiosk
Room E
Done
(2)
Exception
External Input
Selecting Groups
Selecting Groups
of Exception
of Exception
External Input 1
External Input 2
Exception
External Input
Selecting Groups
Selecting Groups
of Exception
of Exception
External Input 1
External Input 2
(4)
25/01/2010 (Mon) 10:20
Back
25/01/2010 (Mon) 10:20
Back
(5)

Advertisement

Table of Contents
loading

Table of Contents