Pc-Lh3(A/B) - Hitachi PC-ARF Technical Catalogue

Hide thumbs Also See for PC-ARF:

Table of Contents

3 Features and benefits

Individual remote controls

3.1.4 PC-LH3(A/B)

Wireless remote control that requires no wiring and provides simple one-touch operation.

Same remote control for all the indoor units.

Each indoor unit has its own receiver.

Up to 16 indoor units can be controlled simultaneously by one wireless remote control in case that all units are installed

in the same room. To do this, the indoor units must be interconnected by means of control cables.

Specific function "Identifying of indoor units installed side by side" for those indoor units which are installed very close

and each one needs to be independent. This function enables to operate individually each unit without interfering other

unit's operation.

PC-LH3A is available for combination with the receiver kits (PC-ALH, PC-ALHN, PC-ALHC, PC-ALHD and PC-ALHZ).

PC-LH3B is available for combination with the receiver kits (PC-ALH3, PC-ALHZF and PC-ALHP1) and the indoor units

which are supported HIGH2 fan speed mode.

The fan speed setting "HIGH2" is not indicated on PC-LH3A.

Wireless receiver kit

PC-LH3(A/B) requires the installation of a wireless receiver kit in order to let the indoor unit receive the signal from the wire-

less remote controller. The list of all the available wireless receiver kits for each indoor unit is shown below:

Receiver kit

RPK-FSN(H)3M indoor unit comes with a built-in wireless receiver kit in the panel. Use PC-LH3B wireless remote controller

in combination with this indoor unit.

TCGB0106 rev.0 - 12/2014

PC-LH3(A/B): Wireless remote control

Wireless remote control

RPI-FSN(3/4)(P)E

RPIM-FSN4E(-DU)

RPK-FSN(H)2M

RPF(I)-FSN2E

RPK-FSN(H)3M

Installation type

On the panel