Hitachi PC-ARF Technical Catalogue page 297

5 Centralised remote controls
PSC-A64GT

Demand Function Setting
The operating condition of the indoor unit is changed to "Stop" or "Thermo-OFF" when "Demand Function" is selected to
the terminal of external input 1.
Demand Function Setting
1 Select "Demand Function Setting" on the screen of "Service Menu".
N O T E
This function cannot be selected when the external input signal is input to the external input terminal 1 or 2.
2 Select "Demand Function Setting" on the "Demand Function Setting" screen.
(1)
Service Menu
Optional Function
Group Register
Setting
Exception Demand Function
External Input Setting
Checking
Restore Setting
Connection
Alarm History
3 Select the function by tapping the button for each demand function setting.
4 Tap "Done" to return to the screen of "Demand Function Setting".
N O T E
If the target groups for the demand function are not selected, tap "Selecting Group for Demand Function" and select the target groups.
5 Tap "Back" to finish this setting.
The screen is returned to "Service Menu".
Demand Function
Setting
Demand Function 1 2
3 4
281
TCGB0106 rev.0 - 12/2014
25/01/2010 (Mon) 10:20
Exception Setting
External
of Run/Stop
Input/Output Setting
Operation
Contact Info.
Button Setting
Register
Back
(3)
25/01/2010 (Mon) 10:20
Random selection
Enable Disable
of group for
Demand Function
Done
(4)
(2)
Demand Function
Setting
Selecting Group
Demand Function
for
Setting
Demand Function
Demand Function
Setting
Selecting Group
Demand Function
for
Setting
Demand Function
25/01/2010 (Mon) 10:20
5
Back
25/01/2010 (Mon) 10:20
Back
(5)