Hitachi PC-ARF Technical Catalogue page 526

6 Building air conditioning controls
CSNET WEB (PSC-A160WEB1)

Use of system tray
If user close the window using the cross button, application will still run setting an icon on the system tray.
Clicking twice over the system tray icon will open the application. Using right button of the mouse over it will open a little
menu that will allow to the user between close completely the application or open it.

Troubleshooting
User will normally have the application closed on the system tray, because it will not be always managing things. But having
that icon there will be so useful due to the alarm notification.
When an alarm occurs system tray icon will switch to red colour and it will be like this until alarm will be disappeared. Alarm
displaying message should be activated on the user configuration.
First time than alarm occurs it will appear a system notification showing that this alarm has been appeared with the alarm
code and unit address.
Alarms could also be watched on the alarm led of the virtual remote control or on the units list.
510 510
TCGB0106 rev.0 - 12/2014
Alarm
Alarm Description:
Unit [Port: 1, Ou: 11, Iu: 1] - > Alarm Code: 99