Hitachi PC-ARF Technical Catalogue page 715

Hide thumbs Also See for PC-ARF:

Table of Contents

8 Control support devices

If using an electrical box

There are different types of electrical boxes available on the market that can be used for this installation, for example:

Electrical box for one remote control unit (without cover).

Electrical box for 2 remote control units (without cover).

Electrical box for one remote control unit (with cover).

Electrical box for 2 remote control units (with cover).

Output box (with cover).

1 Prepare the electrical box.

2 Pass the cable through the wall duct.

3 Attach the bracket to the electrical box.

4 Connect the cable to the PCB connector or to the terminals.

5 Fix the timer to the bracket

a. Insert the hooks of the timer into the holes on the top of the bracket.

b. Push the bottom part of the timer towards the bracket.

c. The timer will click when it is secured in place. Check that the four hooks

are correctly inserted.

TCGB0106 rev.0 - 12/2014

Attach the bracket with the

mark upwards

Screws (accessories)

Troubleshooting