Hitachi PC-ARF Technical Catalogue page 278

5 Centralised remote controls
PSC-A64GT

Touchscreen Calibration
1 Select "Touchscreen Calibration" from the screen of "Menu".
(1)
2 Calibrating touchscreen
Tap every intersections of white lines sequentially indicated on the screen.
After that, the screen will be changed to (3).
If the intersections of white lines are not recognized normally, "Calibration is cancelled" will be displayed on the screen.
And then, the screen will automatically return to the screen of "Monitor 1 (All Groups)" or "Monitor 2 (Block)" without cali-
brating.
(2)
3 "Checking tap position of touchscreen"
Touch the intersection of white lines sequentially according to the screen indication.
The white dots will be indicated when tapping other than the intersection of white lines.
When every intersections of white lines are normally recognized, the screen will automatically return to the screen of
"Monitor 1 (All Groups)" or "Monitor 2 (Block)".
(3)
262
TCGB0106 rev.0 - 12/2014
Menu
Filter Sign Reset Schedule Setting
Touchscreen Group Name
Calibration Register
Accumulated
Contact
Operation
Information
Time
Calibrating of touchscreen.
Tap the intersection of white lines.
Checking tap position of touchscreen.
Tap the intersection of white lines.
25/01/2010 (Mon) 10:20
Adjusting Touchscreen
Date/Time Cleaning
Screen Display
Setting
Service Menu
Back