Hitachi PC-ARF Technical Catalogue page 529

6 Building air conditioning controls
CSNET WEB (PSC-A160WEB1)
The table with all the functions and their description is shown below.

Table of functions
Pins Function
All OFF Rest
Restore the network
2
configuration
3 Restore passwords
4 Restore configuration
Notification of the IP
5
address
6 Information on units
Central Station
7
compatibility
8 Set Packaged units
513 513
TCGB0106 rev.0 - 12/2014
Indicates the type of installation (PA Packaged) If there is an alarm it shows the alarm code and
the units with this alarm.
Restore the IP address Mask and Gateway to the initial values of:
IP: 192.168.0.3
Mask: 255.255.255.0
Gateway: 192.168.0.1
Set the "User" password to "User" and the "Installer" password to "Installer".
Deletes the configuration of the installation and restores the passwords as in the previous point.
Shows the IP address and the CSNET WEB port.
Shows the number of indoor and outdoor units recognized by CSNET WEB.
It enables the compatibility with central stations.
CSNET WEB has always priority so if a unit is set as central, Central Station will not be able to
modify the state of the unit. The same happens with remote sensor not configured option.
C A U T I O N
All units should be controlled by a Central Station, otherwise it will appear a communication alarm.
Set units as Packaged. Value 0 means that units are Packaged.
Description
6