Hitachi PC-ARF Technical Catalogue page 673

7 Gateways for building management systems
KNX001
4 Enable the check box off-line under the menu bar (it will change to on-line) and HGT will ask for INFO from KNX001.
If the connection is correct, KNX001 will respond with its identification (this can be supervised via the console window
of communication with KNX001, as shown in the image). This window shows information messages where the KNX
groups appear with their value when changes in their status occur.
Once connected, all HGT's supervision and monitoring options are available.
To monitor communication between KNX001 and the KNX Bus, select the menu See -> Bus -> EIB. The window
of the Communication viewfinder of KNX will be opened. This window shows in real time the communication links
with the KNX bus, along with information messages.
657 657
TCGB0106 rev.0 - 12/2014
7