Hitachi PC-ARF Technical Catalogue page 714

Hide thumbs Also See for PC-ARF:

Table of Contents

8 Control support devices

2 Select and cut the knockout hole through which to pass the cable.

Determine the position of the wiring and drill one of the holes marked with

* in the diagram.

If using an accessory cable, drill a hole on the bottom.

3 Insert the cable through the hole/s.

Strip the protective insulation from the accessory cable supplied, if used.

4 Connect the cable to the PCB plate connector or to the terminal.

5 Fix the timer to the bracket.

TCGB0106 rev.0 - 12/2014

Attach the band to

the cable inside the

knockout hole

a. Insert the hooks of the timer into the holes on the top

of the bracket.

b. Push the bottom part of the timer towards the bracket.

c. The timer will click when it is secured in place. Check

that the four hooks are correctly inserted.

Twisted pair cable

(field supply)

Accessory cable

(field supply)

Troubleshooting