6 Building air conditioning controls
HC-A64NET
Configuration procedure
Configuration through USB port
This method is required when the device IP is unknown.
1 Connect the network device to a computer by a USB cable (field supplied or available with the Net Configuration Kit).
2 Select the communication port of the computer.
3 Press the
button at screen
Configuration through Ethernet port
1 Connect the Network device to a computer by a ethernet cable (field supplied, or factory supplied with CSNET Manager
or available with the Net Configuration Kit).
2 Input the following parameters:
•
IP Address: 192.168.0.4
•
Port: Modbus Gateway / HC-A64NET
3 Press the
button at screen
619
619
TCGB0106 rev.0 - 12/2014
6