Hitachi PC-ARF Technical Catalogue page 291

5 Centralised remote controls
PSC-A64GT

Exception Setting of Run/Stop Operation
This function is used in cases of exception to the command of "All Groups Run/Stop" operation and "Run/Stop by Block"
operation to the selected groups or blocks.
Selecting of "Exception Setting of Run/Stop Operation" (All Groups/Block) is available as follows.
• Run and Stop
• Run
• Stop
N O T E
• "All Run/Stop" and "Run/Stop by Block" command will not be affected when they are set to the groups/blocks. However, these com-
mands are affected as follows even this function is set.
- Scheduled Timer Operation.
- "All Run/Stop" and "Run/Stop by Block" by External Input command.
• "Run/Stop" operation is available when the group is selected individually.
Selecting of exception operation
1 Select "Exception Setting of Run/Stop Operation" on the screen of "Service Menu".
2 Select "Selecting of Exception Ope." on the screen of "Exception of Run/Stop Ope."
Service Menu
Optional Function
Group Register
Setting
Exception Demand Function
External Input Setting
Checking
Restore Setting
Connection
Alarm History
3 Select the operation button for exception.
The selected button is rimmed with orange line.
4 Tap "Done" to return to the screen of "Exception of Run/Stop Ope."
N O T E
If the target groups for the exception setting of Run/Stop operation are not selected, tap "Selecting of Exception Groups" and select the
target groups.
5 Tap "Back" to return to the screen of "Service Menu".
(3)
Exception of
Run/Stop Ope.
Run and Stop Run
275
TCGB0106 rev.0 - 12/2014
25/01/2010 (Mon) 10:20
Exception Setting
External
of Run/Stop
Input/Output Setting
Operation
Contact Info.
Button Setting
Register
Back
25/01/2010 (Mon) 10:20
Stop
Done
(4)
(1)
(2)
Exception of
Run/Stop Ope.
Selecting of Selecting of
Exception Ope. Exception Groups
Exception of
Run/Stop Ope.
Selecting of Selecting of
Exception Ope. Exception Groups
5
25/01/2010 (Mon) 10:20
Back
25/01/2010 (Mon) 10:20
Back
(5)