Hitachi PC-ARF Technical Catalogue page 318

5 Centralised remote controls
PSC-A32MN

Language Setting
When turning the power supply ON for the first time, the language setting screen is displayed after a few minutes.
Select the language for operation and tap "Set".

Adjusting Date/Time
After setting the language, the screen for adjusting date and time screen is displayed on the touchscreen as shown in the
figure.
Tap "Set" on the touchscreen display, and set the date and time following the indicated procedure.
Refer to the Adjusting Date/Time section in the Menu chapter for detailed information.
N O T E
Setting the date and time may be required after a prolonged power failure. If "Set Date/Time" is displayed on the screen in such a case,
then tap "Set" to adjust the date and time.
302
TCGB0106 rev.0 - 12/2014
Set Date/Time
Set