Hitachi PC-ARF Technical Catalogue page 462

6 Building air conditioning controls
CSNET WEB (PSC-A160WEB1)
Fidelio Configuration
CSNET WEB is compatible with a Hitachi H-LINK to Fidelio Gateway.
Each unit can be linked to a Fidelio register to know if there is a check in or check out condition on that room.
For each unit can be assigned a pattern similar to the timer one that describes a condition for check in and another for
check out. It also can be specified the data period where that patterns applies.
To activate the Fidelio compatibility it must be selected the check box and specified an accessible IP for the Hitachi Fidelio
gateway.
C A U T I O N
Actions configured on the Fidelio dialogue are managed from the CSNET WEB client software, so it is necessary to have the computer
program running to use the Fidelio compatibility.
N O T E
The compatibility with Fidelio protocol was tested with IBOX-MBS-FIDELIO_IP of INTESIS. Hitachi ensures the compatibility with this and
others devices working exactly as the same. To use others devices please contact Hitachi to ensure compatibility.

Alarm notification
CSNET WEB is ready to notify alarms to the users. These alarms are notified by e-mail. To configure these notifications
you must open the alarm notification dialogue.
Clicking on the Change button the dialog will be open and you could start to set the configuration. The configuration is
divided in different parts:
- Alarm notification: allows enable or disable alarm notification function and select between execute this server on
the CSNET WEB HARC or in the computer.
- Account details: settings about the SMTP server.
Notify settings: configuration about the receivers and the period of the notifications.
-
The selection between CSNET WEB Interface and Computer identifies which element will execute the mail alarm function,
and in each case it will have different specifications.
The differences between the configurations are:
- Computer
446 446
TCGB0106 rev.0 - 12/2014