Hitachi PC-ARF Technical Catalogue page 482

Hide thumbs Also See for PC-ARF:

Table of Contents

6 Building air conditioning controls

CSNET WEB (PSC-A160WEB1)

1 By pressing the day of the week, the pattern selected previ-

ously is assigned to all the days of the month corresponding

to the day of the week selected.

2 Pressing a particular day assigns the selected pattern only

to this day.

3 Pressing the arrow >> assigns the selected pattern to all

the days of the week.

4 Pressing the name of the month assigns the selected pat-

5 Pressing the upper left button it will select all the working

days of the month. This means all days excluding Satur-

days and Sundays. Note that this button will only appear

when it will be on timer edition mode.

6 After setting the timer, press the Update button to confirm

the programming.

Timer update will take few minutes, during this time, the edition of timer

and pattern will be block and it will appear a waiting for timer update

Assigning the timer

After the Timer has been created, you can assign it to all the

units which have to use it. Do this as follows:

Press the (1) field button from the drop-down menu to select

the units to which you want to assign the timer. The list includes

the following options:

Single Unit: Select the unit marked in the table of indoor

Area: Select all the units found in the same group as the

unit marked in the table of indoor units.

Outdoor: Select all the indoor units connected to the same

outdoor unit as the unit marked in the table of indoor units.

All Units: Select all the indoor units.

Press button (2) Assign Timer to: to assign the timer to the

units selected.

TCGB0106 rev.0 - 12/2014

Troubleshooting