Hitachi PC-ARF Technical Catalogue page 242

5 Centralised remote controls
PSC-A64GT
N O T E
• Turn OFF the power supply when setting the dip switches and rotary switch. Do not touch directly the printed circuit board and metal
part to avoid the central station malfunction.
• The central station is reconnected to H-LINK/H-LINK II automatically when change the setting of H-LINK or H-LINK II.
• When same central station are connected to H-LINK with incorrect DIP switch setting, then "63" alarm will be indicated in the central
station. In this case, turn OFF the power supply for all central control devices, and check the dip switch settings of each central control
device. After that, restart central control devices.
• (*): When using several central stations at the same time, set the values of each "RSW1" not to overlap.
DSW1 setting
Combination
of PSC-A64GT Other central
with other central controllers
controllers
Without other central controllers
(1)Check compatibility limitations in CSNET WEB section.
2 Close the unit case until hearing a snapping sound, and make sure that the front and rear parts of the case close fully.
At this time, check that connection bands are not trapped between the front and the rear parts of the case.
226
TCGB0106 rev.0 - 12/2014
Name Model
Central Station EZ PSC-A64GT
Central Station mini PSC-A32MN
Central Station PSC-A64S
Centralised ON/OFF
PSC-A16RS
Controller
HC-A(8/64)MB
HC-A16KNX
BMS Gateways
KNX001
HARC-BX E (A/B)
CSNET Manager LT
CSNET CSNET Manager XT
CSNET WEB (1)
Catch for fixing
Hook
DSW1
OFF
OFF
OFF
OFF
OFF
OFF
Top
Convex part
cover
Catch
for fix-
ing
DSW2 DSW3 DSW4
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
Not compatible
Not compatible
Not compatible
Not compatible
Not compatible
Not compatible
OFF OFF OFF
OFF OFF OFF