Hitachi PC-ARF Technical Catalogue page 722
Hide thumbs
Also See for PC-ARF:
- Installation and operation manual (350 pages) ,
- Installation and operation manual (41 pages)
Table of Contents
Advertisement
8 Control support devices
PSC-A1T
Holiday setting
<Example> "B" pattern, Tuesday
N O T E
•
This setting temporarily cancels the operating schedule.
•
The scheduled operation will be cancelled only for the day set as a holiday, afterwards the scheduled operation will once again be
available. This function is used in the event of an irregular holiday.
Press the "SET/MONITOR" button.
The timer switches to setting mode, the "SET" indication will appear and the ▼ symbol will flash.
Select schedule mode A or B by pressing "A/B".
The diagram on the right shows the selection of setting mode B.
Select the day to be set as a holiday by pressing the "DAY" button.
Refer to the previous "Time settings for: ON/OFF" for the indication of the "▼" mark.
In the diagram on the right, the selection is set to "Tuesday".
Press the "HOLIDAY" button.
The "HOLI" indication will switch on and the selected day will be set as a holiday. In the case that the
selected day is not set as running day the "▼" mark is turned off. The holiday setting is not available for
the day. (In case that all days of a week are selected, only the running day is set as "holiday").
By pressing "HOLIDAY" again, the holiday setting is cancelled.
Press "SET/MONITOR".
The "SET" indication will go off and the remote control timer will switch to monitor mode.
C A U T I O N
•
If the current day is set as a holiday, the holiday setting will be active from that moment on and the programmed mode is cancelled
until the following day. In this case, the same day of the subsequent week will not be a holiday.
•
During the timer pause mode, the mode is not changed to the setting mode by depressing the "SET/ MONITOR" switch.
Checking the setting content
Press the "DAY" button in monitor mode
The ▼ symbol moves and the day setting content is indicated with the ▼ symbol.
In the diagram on the right, the selection is set to "Tuesday".
N O T E
During the timer pause mode, checking the contents of setting cannot be performed.
706
TCGB0106 rev.0 - 12/2014
Turned ON
Turned ON
Turned ON
Turned OFF
Turned ON
Advertisement
Table of Contents
Troubleshooting
