4 Individual remote controls
PC-LH3(A/B)
4.4.2.3 Dimension data
56
4.4.2.4 Installation space
The space necessary for the installation is the minimum necessary to fix the bracket allowing to remove without problems
the remote control.
4.4.2.5 Batteries setting
Place the batteries (AAA/1.5Vx2) in the controller as follows.
1 Remove the battery cover by sliding toward the arrow
direction by pushing the part of the cover as shown in
the figure below.
2 Insert the batteries according to the marks of + and - on
the case.
173
TCGB0106 rev.0 - 12/2014
16.4
56.5
ø4.5
5 x 4.6
(mm)
14.2
23.4
Slide toward
the arrow
direction with
pushing
AAA Bateries
4