Hitachi PC-ARF Technical Catalogue page 576

6 Building air conditioning controls
CSNET Manager LT/XT
- OU Serial No: Serial number of the outdoor unit to which the indoor unit is connected (see Note 2).
• TSet Limits
- Cool Range: Sets the maximum and the minimum temperature values in cool mode.
Heat Range: Sets the maximum and the minimum temperature values in heat mode.
-
N O T E
1. If the indoor unit is RPC or RPK, CSNET WEB will display RPC(RPK), as they cannot be identified properly.
2. The precise model should be entered to make necessary maintenance and repair work easier.
3. There following are possible types of outdoor units:
• RAS-#.# (UTO): Utopia and Utopia Big.
• RAS-#.# (INV): Utopia Inverter.
• RAS-#.# (SF): Set-Free and Mini Set-Free.
4. It is not possible for two or more units with a remote controller to function in different conditions. Only use the remote control Group
within the same cooling system or CH Box. Do not use a single controller to control indoor units connected to different outdoor units or
CH boxes.
5. The compatibility of the operation modes is as follows:
Operation mode
Cool
Heat
Dry
Fan
Automatic cooling / heating
6. This information will be used by CSNET Manager to calculate the control parameters of the cooling system, like TdSH.
560 560
TCGB0106 rev.0 - 12/2014
Compatible modes in the other units of the same group
Cool, Dry, Fan
Heat, Fan
Cool, Dry, Fan
Cool, Dry, Heat, Fan
Automatic cooling / heating