Local Software Configuration - Hitachi PC-ARF Technical Catalogue

6 Building air conditioning controls
CSNET Manager LT/XT

6.2.4.5 Local software configuration

After configuring the CSNET Manager interface you should begin the configuration of the system. To install the RCS
Web instead of CSNET Manager read the chapter
CSNET Manager with only remote control functions but more user-friendly for a non-expert user.
N O T E
CSNET Manager needs at least the following to be configured:
• Local software configuration (see next page)
• Area tree (see chapter "Area
• Configuration of the unit (see chapter
• Auto Cool/Heat (see chapter
• Fan stop heating during thermo-off (see chapter
We recommend configuring the other points indicated in the manual at the same time, although this can be done later.
After switch ON the CSNET Manager, a page appears in which must be specified the language you want to use. The same
screen shows a timer (this can be configured later), which runs down to zero and then runs the software in the selected
language.
Wait 10 seconds or press the OK button, CSNET Manager will show the Initial Page.
N O T E
Please be aware that pressing the ON/OFF button of CSNET Manager forces a complete shut down
531 531
TCGB0106 rev.0 - 12/2014
"6.2.5.4 RCS
tree")
"Unit Setting")
"Auto cool/heat")
"Fan stop heating during
Web". Remember that RCS Web is a reduced version of
thermo-off")
6