Table of Contents
Advertisement
UNIT CONTROLLER
7.4 CONTROLLER CONFIGURATION
•
Select the desired language using the arrow keys.
•
Press OK button.
•
Select the date and time using the arrow keys.
•
Press OK button.
•
Select Yes when the device is controlling the unit which it is
attached. Jump to screen 6.
•
Select No when the device is installed in a different site than
the unit.
•
Press OK button.
54
PMML0575 rev.1 - 09/2021
•
Select No when the device acts as Room Thermostat only. It
does not control the unit.
•
Press OK button.
•
Select No when the device is not used as a room thermostat.
•
Select Yes, in zone 1/ Yes, in zone 2 / Yes, in both zones,
depending on the number of circuits controlled.
•
When select Yes, in both zones, jump to screen 8.
•
Press OK button.
•
Select the number of circuits (1 or 2) .
•
Press OK button.
•
Select the heat emitters on the circuit 1: Underfloor heating,
Fan coils or Radiators.
•
Repeat this step in case of circuit 2.
•
Press OK button.
Advertisement
Table of Contents
