Custom Factory Configuration; Deleting The Custom Factory Settings Files; Packets Capture; Capturing The Packets Via Web User Interface - Yealink W60P Administrator's Manual

Administrator's Guide for W60P/W53P/W41P DECT Phones

Custom Factory Configuration

The following table lists the parameters you can use to configure custom factory.
Parameter static.features.custom_factory_config.enable
Description It enables or disables the Custom Factory Configuration feature.
0-Disabled
Permitted
1-Enabled, Import Factory Configuration item will be displayed on the IP phone's web user interface at
Values
the path Settings->Configuration. You can import a custom factory configuration file or delete the user-
defined factory configuration via web user interface.
Default 0
Parameter static.custom_factory_configuration.url
It configures the access URL of the custom factory configuration files.
Description
Note: It works only if "static.features.custom_factory_config.enable" is set to 1 (Enabled) and the file
format of custom factory configuration file must be *.bin.
Permitted
URL within 511 characters
Values
Default Blank
Web UI Settings->Configuration->Import Factory Config

Deleting the Custom Factory Settings Files

You can delete the user-defined factory configurations via web user interface.
Procedure
1. From the web user interface, click Settings->Configuration.
2. Click Delin the Import Factory Config field.
The web user interface prompts the message "Are you sure delete user-defined factory configuration?".
3. Click OK to delete the custom factory configuration files.
The imported custom factory file will be deleted. The IP phone will be reset to default factory settings after reset-
ting.

Packets Capture

You can capture packet in two ways: capturing the packets via web user interface or using the Ethernet software. You
can analyze the packet captured for troubleshooting purpose.
Topic

Capturing the Packets via Web User Interface

Capturing the Packets via Web User Interface
For Yealink IP phones, you can export the packets file to the local system and analyze it.
Procedure
240
<y0000000000xx>.cfg
<y0000000000xx>.cfg