Alcatel-Lucent Barge In Parameters - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones

Alcatel-Lucent Barge in Parameters

If you want to use Barge In feature, you should configure a feature access code on the phone. If no feature access
code is configured, the Barge In feature is disabled.
Parameter blf.normal_barge_in_code
It configures the feature access code for normally barging in the active call of the monitored line.
If configured, you can press the Barge In soft key to barge in the call. Barge-in plays an audio alert to
Description
indicate the arrival of a new participant to the call and all call participants can interact.
Note: It applies to the Alcatel-Lucent CTS only.
Permitted
String within 32 characters
Values
Default Blank
Supported
All phones except T48G, T46G, T42G, T41P, T29G, T19(P) E2 and CP920
Devices
The feature access code is *32. A (your phone) monitors party B (number: 8866), party B and party C
is during the call.
Set the following:
Case Scen-
blf.normal_barge_in_code = *32
ario
features.blf.show_callinfo.enable = 1
During the call of the monitored line, long press the BLF key and press the Barge In soft key, then the
phone calls *328866 to barge in the call. All call participants can interact during the call.
Related
features.blf.show_callinfo.enable
Parameters
Parameter blf.whisper_barge_in_code
It configures the feature access code for barging in the active call of the monitored line in whisper.
If configured, you can press the Whisper BargeIn soft key to barge in the call. You can hear all call
Description
participants but your audio can only be transmitted to the user you are monitoring.
Note: It applies to the Alcatel-Lucent CTS only.
Permitted
String within 32 characters
Values
Default
Blank
Supported
All phones except T48G, T46G, T42G, T41P, T29G, T19(P) E2 and CP920
Devices
The feature access code is *32. A (your phone) monitors party B (number: 8866), party B and party C
is during the call.
Set the following:
Case Scen- blf.whisper_barge_in_code = *32
ario
features.blf.show_callinfo.enable = 1
During the call of the monitored line, long press the BLF key and press the Whisper BargeIn soft key,
then the phone calls *328866 to barge in the call. You can hear all call participants, but only party B
can hear you.
Related
features.blf.show_callinfo.enable
Parameters
526
<y0000000000xx>.cfg
<y0000000000xx>.cfg