Assembly Of Tilt Cylinder - TOHATSU MFS 25D Service Manual

Install new O-rings 6 and 7, the coupling 8, PT motor
5.
assembly 9, and reserve tank 0, and tighten the bolt q to
the specified torque.
Reserve Tank Bolt:
4.5 N · m (3.3 lb · ft) [0.46 kgf · m]

24) Assembly of Tilt Cylinder

Install a new O-ring 1 to the tilt cylinder 2.
1.
Install a new dust seal 3 to the tilt cylinder 2.
2.
During installation to the inner tube, install from
the side opposite to the outer chamfer a.
Install the free piston first. Each O-ring should be
attached to a specific position in advance.
Install the free piston 4, piston rod assy 5, and new
3.
O-rings 6 and 7 to the inner tube 8.
Install the inner tube assy to the tilt cylinder 1.
4.
4st 25/30 2022
a Chamfer
7
7-47