TOHATSU MFS 25D Service Manual page 173

Disconnect the vent hose w , cooling water hose (drive
10.
shaft housing - vapor separator) e , and vapor separator
drain hose r .
11. Remove the power unit installation bolts.
Loosen the power unit installation bolts in the
order shown in the diagram.
Remove the starter lock cable t, and remove the recoil
12.
starter y (3 bolts).
13. Disconnect the vent hoses u, and remove the belt cover
i.
4st 25/30 2022
A Starboard
B Port
5
5-33