10) Inspection of the Start Switch (EF, EFT)
1.
Check the electrical conductivity of the start switch and
replace it if it is not conductive.
This test can be conducted without removing the
part.
Switch Position
Free: OFF
Pushed: ON
11) Inspection of the Main (Key) Switch
1.
Remove the main switch from the multi-tiller handle or the
remote controller.
2.
Check the conductivity of the key switch and replace it if it
is not conductive.
Remove the part to test it as a separate unit.
Remote Control Model:
Switch
Position
OFF
ON
START
PUSH ON
Tiller Handle Model:
Switch
Position
OFF
ON
START
PUSH START
PUSH ON
4st 25/30 2022
Lead Wire Color
Green (G)
Red (R)
Lead Wire Color
B Br R R G L
Variable Idle
Lead Wire Color
B Br R R G L
Variable Idle
OFF
ON
G
L
R
Br
8
8-25