Removal Of Pt Motor - TOHATSU MFS 25D Service Manual

15) Removal of PT Motor

Remove the reserve tank 2, PT motor 3, and O-rings 4
1.
and 5 from the PT unit 1.
• When removing the PT motor (reserve
tank), the tilt rod should be fully extended
to prevent fluid from spurting out due to
internal pressure.
• Do not push down the tilt rod with the PT
motor removed from the PT unit. Doing so
will cause fluid to spurt out from inside
the PT unit.
Remove the two screws 6, and then remove the yoke
2.
assy 8 from the brush holder 7.
Remove the armature 9 and O-ring 0 from the brush
3.
holder.
4st 25/30 2022
CAUTION
2
4
1
5
3
7
7-41