TOHATSU MFS 25D Service Manual page 219

3. Install the rectifier 3. (Electric Starter Model)
Apply water-resistant grease to the rectifier
gasket.
Install the oil pressure switch 4 and tighten to the
4.
specified torque.
Apply a screw locking agent (ThreeBond 1327) to
the threaded area of the oil pressure switch.
Oil Pressure Switch:
8 N · m (5.9 lb · ft) [0.8 kgf · m]
Install the electrical box 5 and install the bolts 6 (5
5.
locations).
Install the oil pressure switch lead wire 7 and the ground
6.
lead wire 8 (Power Tilt Model).
Oil Pressure Switch Screw:
1.6 N · m (1.2 lb · ft) [0.16 kgf · m]
Apply silicone grease on the oil pressure switch
lead wire screw.
7. Install the ground lead wire 9.
Connect the rectifier coupler 0. (Electric Starter Model)
8.
4st 25/30 2022
5
5-79