21) Inspection of Bevel Gear Assy A
1.
Check the bevel gear assy A teeth and clutch claws for
cracks, damage, or wear.
Replace if necessary.
22) Assembly of Bevel Gear Assy A
Install the shim 1 removed during disassembly and install
1.
the taper roller bearing 2 using a press.
• Replace the shim with a new one of the same
thickness if any deformation or damage is
found.
• Apply gear oil to the contact surface of the taper
roller bearing when installing the taper roller
bearing.
Bevel Gear A Bearing Installation Tool 3:
P/N. 346-72719-0
GEAR
GEAR
GEAR
4st 25/30 2022
6
6-25