TOHATSU MFS 25D Service Manual page 81

Install the coil bracket assembly 9.
14.
Install the ground lead wire 8, battery cable 7 as well as
15.
fuse holder 6 and connect the pulser coil connector 5.
Install the alternator assembly 4 and connect the
16.
alternator assembly coupler.
17. Install the key in the crankshaft, then install the flywheel
3, washer, and flywheel bolt.
• Degrease the tapered sections of the crankshaft
and flywheel.
• Align the positions of the key and key groove of
the flywheel to install the flywheel.
Use the flywheel puller kit 2 to tighten the flywheel bolt to
18.
the specified torque.
Flywheel Puller Kit 2:
P/N. 3T1-72211-4
Flywheel Bolt:
70 N·m (52 lb·ft) [7.0 kgf·m]
Install the starter pulley 1.
19.
20. Install the belt cover and coil starter.
4st 25/30 2022
3
3-17