TOHATSU MFS 25D Service Manual page 177

8) Installation of Flywheel
Install the coil bracket assy 1.
1.
Install the ground lead wires 2, battery cable 3, and fuse
2.
holder 4, and connect the pulser coil connectors 5.
Install the alternator assy 6, and connect the alternator
3.
assy coupler.
4. Install the key in the crankshaft, and then install the
flywheel 7, washer and flywheel bolt.
Use the flywheel puller kit 8 to tighten the flywheel bolt to
5.
the specified torque.
Flywheel Puller Kit 8:
P/N. 3T1-72211-4
Flywheel Bolt:
70 N · m (52 lb · ft) [7.0 kgf · m]
4st 25/30 2022
5
5-37