Table of Contents
Advertisement
Power Unit
4.
Install the cylinder head cover gasket and cylinder head
cover.
Apply 4-stroke engine oil to the cylinder head
cover gasket.
Install the PT relay plate 3. (Power Tilt Model)
5.
6.
Install the spark plugs.
Spark Plug:
18 N · m (13 lb · ft) [1.8 kgf · m]
Install the ground lead wire 4.
7.
Install the ignition coil bracket assy 5 and install the
8.
ignition coil couplers and spark plug caps.
• Tighten the ground lead wire together with the
ignition coil bracket assy installation bolt.
• Apply silicone grease to the spark plug insertion
area of each spark plug cap.
Secure the wire harness with a band 6.
9.
10.
Install the various parts of the air intake system and fuel
system. (Refer to the section on installing the air intake
system & fuel system. 5-81)
11
Install the timing belt and driven pulley. (Refer to the
section on installing the pulley and timing belt. 5-41)
12.
Install the flywheel. (Refer to the section on installing the
flywheel. 5-37)
5-64
4st 25/30 2022
Advertisement
Chapters
Table of Contents
