Lower Unit
19) Removal of Bevel Gear Assy A
1.
Place your hand inside the gear case and remove the
bearing 1 and bevel gear assembly A 2.
• The bevel gear assy A can be removed by
pinching the assy in the gear case with your
fingers and pulling it out from your thumb side
while lifting it up slightly.
• Remove the assy without hitting the bevel gear B.
20) Disassembly of Bevel Gear Assy A
1.
Use a universal puller plate to create a gap between the
ball bearing and forward gear.
Universal Puller Plate:
P/N. 3AC-99750-0
2.
Insert two flathead screwdrivers into the gap and pry out
the bevel gear assy A from the bearing.
Before removal, check the bearing for play or
deflection. Replace if necessary.
6-24
1
2
4st 25/30 2022