TOHATSU MFS 25D Service Manual page 261

Install the roller bearing 4 using the tools below.
6.
Roller Bearing Press Kit:
P/N. 3AC-72900-3
Roller Bearing Outer Press Flange 5:
P/N. 3AC-72900-2
Roller Bearing Outer Press Guide 6:
P/N. 3AC-72765-2
Roller Bearing Press Rod 7:
P/N. 3RS-72769-0
Roller Bearing Press 8:
P/N. 3VS-72770-0
• When installing the guide 6 and flange 5,
be sure that the "F" mark is in the forward
direction.
• Install the bearing with the marked side
facing upward.
• When installing the roller bearing, clean the
installation surface of the bearing and apply
gear oil before insertion.
• Do not reuse the roller bearing. Use a new
bearing.
Installation Depth a:
165.5 - 165.8 mm (6.516 - 6.528 in)
4st 25/30 2022
CAUTION
5
4 Roller Bearing
Do not reuse.
6
6-31