8.
Turn the crankshaft two full rotations in the clockwise
direction, and check that the alignment marks of the
pulleys are aligned.
• Check that the crankshaft turns smoothly.
• Make sure the " " mark a of the drive pulley
is aligned with the " " mark b of the cylinder
block.
• Check that the "
is aligned with the " " mark d of the cylinder
head.
12) Removal of Air Intake System &
Fuel System
Remove the clamp 1 securing the fuel hose.
1.
Remove the band 2 and the band 3 securing the wire
2.
harness.
Disconnect the breather hose 4 and the breather hose 5
3.
(cylinder head side).
4st 25/30 2022
c of the driven pulley
5
5-43