Table of Contents
Advertisement
Power Unit
51) Removal of Recoil Starter
Adjustment of Starter Lock Cable
1.
Shift the gear into neutral (N).
Check that the maximum diameter of the slide 1 aligns
2.
with the neutral start mark 2.
3.
If not, adjust the lower side of the cable.
4.
Perform a shift operation to check that the recoil starter is
locked in a position other than neutral (N).
52) Disassembly of Recoil Starter
1.
Disconnect the upper starter lock cable.
2.
Remove the bolts, and then the recoil starter and belt
cover.
Place the rope into the groove of the reel 1 and gently
3.
turn the reel clockwise to release the tension of the starter
spring.
When replacing the rope only, do so at this time.
The rope can be replaced without disassembling
the recoil.
5-88
1 Slide
2 Neutral start mark
1 Reel
4st 25/30 2022
Advertisement
Chapters
Table of Contents
