Assembly Of Propeller Shaft Assy - TOHATSU MFS 25D Service Manual

18) Assembly of Propeller Shaft Assy

Attach the spring 1, spring retainer 2, push rod 3, ball
1.
4, clutch 5, and clutch pin 6 to the propeller shaft.
• Attach the clutch with the groove side a facing
the push rod side.
• Attach the clutch pin while applying preload to
the push rod.
• Be careful not to allow the push rod to fly out by
spring tension.
GEAR
GEAR GEAR
Attach a new clutch pin snap 7 by using a flathead
2.
screwdriver to turn the snap.
• When attaching the clutch pin snap, do not
apply excessive force to the snap. Doing so
may cause the snap to expand during the
operation of the engine, severely damaging the
gear and/or other parts.
• This can also be done by using the following
tool.
3. After assembly, check that clutch can be operated
smoothly, taking care not to allow the push rod to drop out.
4st 25/30 2022
7 Clutch Pin Snap
Do not reuse.
FWD
7 Clutch Pin Snap Do not reuse.
FWD
6
6-23