TOHATSU MFS 25D Service Manual page 186

Power Unit
13) Removal of Electrical System Parts
1. Remove the air intake system parts and fuel system parts.
Refer to the section on removing the air intake
system & fuel system (5-43)
2. Remove the flywheel, alternator assy, and coil bracket
assy.
Refer to the section on removing the flywheel
(5-35)
Remove the band 1 securing the wire harness.
3.
Disconnect the neutral switch connector 2 and the starter
4.
solenoid lead wire 3.
Remove the spark plug caps 4.
5.
Disconnect the ignition coil couplers 5.
6.
Remove the ignition coil bracket assy 6 and the ground
7.
lead wire.
Remove the ground lead wire 7.
8.
Disconnect the engine temperature sensor coupler 8.
9.
5-46 4st 25/30 2022