TOHATSU MFS 25D Service Manual page 189

14) Removal of Cylinder Head Assy
1. Remove the flywheel. (Refer to the section on removing
the flywheel. 5-35)
2. Remove the timing belt and the driven pulley. (Refer to the
section on removing the timing belt and pulley. 5-39)
3. Remove the air intake system parts and fuel system parts.
(Refer to the section on removing the air intake system &
fuel system. 5-43)
Remove the band 1 securing the wire harness.
4.
5. Remove the spark plug caps and ignition coil couplers,
and remove the ignition coil bracket assy 2.
Remove the ground lead wire 3.
6.
7. Remove the spark plug.
Remove the PT relay plate 4. (Power Tilt Model)
8.
4st 25/30 2022
5
5-49